FMC WECO STYLE HAMMER UNIONS
Figure 100 Hammer unions, is an economical low-pressure union for manifold and line connections. It has metal to metal contacts between subs to work where pressure do not exceed 1000psi NSCWP.
Figure 100- Yellow Sub/ Black Nut
Main Characteristics:
-Pressure: 1000psi cold working pressure, 1500 psi test pressure for standard & NACE service
-Thread: ACME
-Material: Forged Carbon Steel 25 # 45# A395 / ANSI 1040 / A105
-Size: 2”-8”
-End Connections: NPT Threaded & Butt-welded SCH.40(Std.),80(XH)
-Working Temperature Range: -29°C to 121°C (Buna-N)
-Sealing Type: metal to metal
Safety Notes: Hammer Unions work at extremely high pressures, mismatching components of one series with others (for example, fig.602 with fig.1502) can result in a blowout and cause property damage, serious injury and/or death. Even, not matching the same series from the different manufacturers.
Figure 100 Wing Union Thread |
|||||||
Description |
2 in |
2 1/2 in |
3 in |
4 in |
6 in |
8 in |
|
Complete Union |
Part No. |
3200609 HU010200 |
3200610 HU012500 |
3200611 HU010300 |
3200612 HU010400 |
3200795 HU010500 |
3200796 HU010800 |
kgs |
2.7 |
4.5 |
6.4 |
10 |
20.4 |
30 |
|
A Clearance Radius in.(mm) |
81 |
100 |
114 |
135 |
176 |
209 |
|
B Outside Diameter, in.(mm) |
70 |
83 |
102 |
132 |
186 |
241 |
|
C End-to-end, in.(mm) |
92 |
109 |
124 |
146 |
171 |
183 |
|
D Inside Diameter, in.(mm) |
55 |
65 |
81 |
106 |
160 |
209 |
Figure 100 Wing Union BW Schedule 80 |
||||||
Description |
2 in |
3 in |
4 in |
6 in |
8 in |
|
Complete Union |
Part No. |
3200609 HU010220 |
3200611 HU010320 |
3200612 HU010420 |
3200795 HU010520 |
3200796 HU010820 |
kgs |
2.7 |
6.4 |
10 |
20.4 |
30 |
|
A Clearance Radius in.(mm) |
81 |
114 |
135 |
176 |
209 |
|
B Outside Diameter, in.(mm) |
2.735 |
3.5 |
4.5 |
6.625 |
8.625 |
|
C End-to-end, in.(mm) |
3.79 |
4.8 |
4.98 |
7.56 |
7.31 |
|
D Inside Diameter, in.(mm) |
1.939 |
2.9 |
3.826 |
5.761 |
7.625 |
WECO Hammer Union Seals
Lip type seal ring is an elastomer component, as a secondary seal to protect metal-to-metal against corrosion, which minimizes fluid flow turbulence while creating a pressure seal. Depending on the union figure it can be a lip type “seal ring” or an “O-ring”. Different material s are available to suit for different fluid service. Buna-N (NBR) is common for standard service, Viton (FKM) for H2S service.
When you want to buy the replacement hammer unions, please remember BETTER, BETTER is a one supplier focusing on the quality, all our hammer unions are API 6A approved, to deliver those high quality parts with a surprisingly low price is our advantage.Call to speak with one of our experienced sales to tell your request!